Making the fiber ligtsource.

Because there are several signal and control lights on de the dashboard I made two small prints with all the leds on them.

The print in the build up fase: several holders are already installed.

The green LED.

and the same LED but now with the red color.

All the holders on there place.

The bottomside with the connections, red-white for the minus, green-white for the green color and red-brown for the red color.

All these fibers need to go to there light source.

The making of the 4 mm holders for the single color leds: Make the holder on the lathe, the tube and the holder and solder.

Holder with led

the multi fiber holder.

The second light source.

The complete lightsource.

Mounted underneath the floor.

good access to the holders

all on it's place in de wheelhouse.

The fibers are connected to the lightsource.

the control lights of the deck floodlights.

from the floodlight at the back of the cabin,

together with the front lights.

Allmost all the other control lights on,

Including the floodlights.

and this is the result from outside the wheelhouse.