The ruders are made out of a 5 mm thick aluminium plate. At the top and bottomside there is a 1 mm rib and the rest of the ruder is milled.
the rib on the top and bottomside and a rough version.
the angled side are milled.
the axles mounted.
a clear view on the angled side.
complete with the Kort Nozzle and distance tube.
the small servo mounted between the ruders.
At first I wanted to place the servo between the ruders but this gave some height issues, the top of the ball joints would touch the bottom of the deck so I changed the mounting place and height
mounted the servo forward and 6 mm lower
Should be more then enough ruder movement